What should peanut machinery pay attention to in the process of use?

Peanut oven is very common in the daily production and processing. What details should we pay attention to in the use process?

1. Before the fire, check the oil level display tube on the expansion tank to ensure that the oil level is about 20 mm higher than the bottom of the glass tube. If the oil level is not up to the standard, supplement the heat transfer oil in time.

2. Turn on the high-temperature pump to accelerate the circulation of heat-transfer oil immediately after the fire is started. When the temperature of the oven reaches 80 ℃, start the forward rotation button of the rotating cage to make the rotating cage enter the working state, so as to prevent high-temperature deformation.

3、 The oil temperature of the oven shall be controlled at 290 ℃ -300 ℃. The temperature shall be controlled by opening and closing the fuel door. When the oil temperature is higher than 300 ℃, open the fuel door to cool down. When the oil temperature is lower than 290 ℃, close the fuel door to raise the temperature. The oil temperature shall not exceed 300 ℃ to prevent the heat transfer oil from reaching the boiling point.

4. In the process of operation, when operating the forward and reverse buttons, the rotating cage shall be stopped stably before the reverse button is started, so as to prevent the inertia action from damaging the motor and other components.

Attention to the above small details can not only prolong the service life of peanut machinery, but also improve our work efficiency. Therefore, this can not be ignored.