The working principle and characteristics of the flash dryer

The flash dryer is a new type of drying equipment developed by our factory. The performance of the whole machine has reached the international advanced technology level.

The principle of the flash dryer is that the hot air enters the agitating and pulverizing drying chamber from the bottom of the dryer from the bottom of the dryer; the material is strongly sheared, blown and rotated, and the material is micronized by centrifugation, shearing, collision and friction. Particles with a smaller particle size are entrained by the swirling gas stream and further dried during the ascending process. A special squeegee device is installed in the lower part of the dryer; the deterioration of the material in the low temperature zone is avoided.

Several features of the flash dryer are as follows:

1 The work efficiency is high, and the flash dryer can be refined and evaporated in the shortest time, which greatly improves the work efficiency.

2 Long service life, the cooling function used at the bottom of the flash dryer avoids the shortcomings of the previous variants of the dryer and thus greatly prolongs the service life.

3 Dry thoroughly, the imported high-end movement used in this product can dry at 360 degrees and will not leave a dead end.

The above is the principle of the new art dryer and the three characteristics of the dryer.