Peanut sheller with several major advantages to become a leader!

1、 Before using the peanut sheller, first check whether the fasteners are tightened, whether the rotating parts are flexible, whether there is lubricating oil in the bearings, and whether the sheller is placed stably. In order to ensure the safety of the operators, the shell of the motor must also be grounded (the shell of the electric motor must be reliably connected with the grounding body by wires)

2、 Before power on, turn the husk remover for several circles by manpower. If there is impact sound, find out the cause and power on again

3、 Proper sieve should be selected according to the size of peanut kernel

4、 After power on, the test run shall be carried out first and attention shall be paid to whether the rotation direction of the rotor is correct. After the motor is started, the rotation direction of the rotor shall be consistent with the direction marked on the machine tool. The peanut can be put into the hopper quantitatively, evenly and continuously after idling for several minutes and observing whether there is any abnormal noise and the operation is normal and stable

5、 There are also requirements for the degree of dryness and wetness of peanuts, that is, peanuts should not be too dry or too wet. If they are too dry, the breaking rate of peanuts will be high; if they are too wet, the speed of shelling will be slow

6、 The way to solve the problem is to move the motor down, so as to tighten the fan belt and increase the blowing capacity

7、 During peeling, the peanut shall be fed evenly and properly. It is absolutely not allowed to mix iron chips, stones and other sundries to prevent breaking the peanut kernel or causing mechanical accidents. When the peanut kernel is covered with the sieve, the outlet switch can be opened