How to use peanut peeler?

Literally, peanut peeling machine is to remove the peanut shell and leave only the particles. It has a good peeling structure and can completely protect the peanut without damaging the particles. It greatly reduces the manual production of the working people and improves the production efficiency. What should we pay attention to when using peanut peeler?

1. First, check whether the fasteners are tightened, whether the rotating part is flexible, whether there is lubricating oil in each bearing, and whether the peeling machine is placed stably. In order to ensure that the operator, but also on the motor shell grounding protection.

2. Before power on, turn the peanut red skin peeling machine by manpower for several circles. If there is impact sound, find out the cause and power on again. Proper sieve should be selected according to the size of peanut kernel.

3. Requirements for the degree of dryness and wetness of peanuts: peanuts should not be too dry or too wet, too dry, and the rate of breaking peanuts is high. If it is too wet, the speed of shelling will slow down. In winter, peanuts stored in rural areas are generally dry. In order to make them dry and wet properly, 15kg of warm water can be used to evenly spray on 100kg of peanuts, and cover them with plastic film for about 10 hours, then dry them in the sun for about 1 hour to start shelling. In other seasons, it only takes about 6 hours to cover with plastic film, and other operation methods are the same. The way to solve the problem is to move the motor down, so as to tighten the fan belt and increase the blowing capacity.

4. After power on, the test run shall be carried out first and attention shall be paid to whether the rotation direction of the rotor is correct. After the motor is started, the rotation direction of the rotor shall be consistent with the direction marked on the implement. First idle for a few minutes, observe whether there is abnormal noise, and then put the peanut into the hopper quantitatively, evenly and continuously.

With the development of agriculture, the productivity of farmers is increasing, and the output of crops is also increasing. Many manufacturers are also increasing their output. As a kind of crops, peanut has a very high production. Therefore, peanut peeling can be used more and more widely.