How to choose high quality peanut sheller

Peanut planting, whether in planting or harvesting, has realized intelligence when processing, just like before, people shelled peanuts manually, the efficiency is very slow and the quality is not very good, but now people use peanut sheller to shelling, greatly improving the work efficiency. The requirement of purchasing sheller correctly: peanut machinery

1、 Before purchase, check whether the fasteners are tightened, whether the rotating part is flexible and whether there is lubricating oil in each bearing. After the motor is started, whether the rotation direction of the rotor is consistent with the direction indicated on the implement.

2、 First idle for a few minutes and observe whether there is any abnormal noise.

3、 Observe whether their cross-sections are small at the top and large at the bottom; whether the longitudinal sections are symmetrical at the left and right; and whether the axes of rotation in the same direction are parallel to each other.

4、 Carefully check that there is a pull rod connected on the other end face of the adjusting handle. The pull rod is driven by the connecting rod on the tensioning wheel, which is connected with the tensioning governor.

5、 The discharge comb and discharge control board installed under the drum shall also be observed carefully.

Hope that the majority of peanut sheller users read the above precautions, will help you.