Precautions And Maintenance Of Peanut Chopping And Milling Machine

1. Check whether the power supply is normal before starting the machine

2. When the equipment is in normal operation, do not open the door of the mill.

3. When you need to replace the scraper, you can loosen the bolts on the scraper. After replacing them, you must tighten the bolts to avoid loosening of the bolts and causing undesirable consequences.

4. The reducer of the pulverizer should be regularly maintained and filled with lubricating oil every three months.

5. The staff should carefully check whether the bolts at the connection are loose before starting each shift. If there is any looseness, use a wrench to tighten it before starting.