Peanut peeler is widely praised for its practicability.

Peanut peeler is mainly designed for peanut processing, so many purchasers have proposed that lotus seed shell can be removed, which is not allowed, even if the screen is replaced, lotus seed can not be processed, because peanut peeler is specially designed for peanut particle size and hardness.

The main structure of peanut peeler is composed of frame, protective cover, hopper, outlet, screen, scraper and shell suction machine. The production efficiency of the environmental peanut peeler is higher than that of the small one, and it also saves energy. The motor is 1.5KW, with the function of moving, which is more convenient. It is easy to have a lot of dust flying when processing dried flowers and fruits. The environmental protection production of peanut sheller will reduce this, but there is still a small amount of dust, so it is recommended that the staff wear masks during processing.

Peanut peeler requirements for peanuts. Peanuts are suitable for drying and wetness, but if they are too dry, their crushing rate will be high; if they are too wet, their working efficiency will be affected. Peanuts (peels and fruits) stored in rural areas are generally dry. In order to make them suitable for drying and wetting, the following methods can be used.

1) . shelling in winter. Before shelling, spray 10kg warm water evenly on 50kg skin and fruit, cover with plastic film for about 10 hours, then cool in the sun for about 1 hour to start shelling, cover with plastic film for about 6 hours in other seasons, the rest are the same.

2) . soak the dried peanuts (peels and fruits) in a large pool, pull them out immediately after soaking and cover them with plastic film for about 1 day, then cool them in the sun, and start shelling when they are dry and wet properly.