Detailed description of the inspection and storage of the V-belt when using the peanut peeler

The peanut peeling machine is conveyed by a V-belt. After the new belt is used for a period of time, it will gradually elongate and appear slack due to the pulling force. Therefore, it is necessary to regularly check the tension of each transmission belt and the clearance of each fitting part. Make adjustments. During the operation, always pay attention to whether the speed, sound and temperature of the machine are normal. Every time after removing one type or one day of work, it should be stopped to check whether the bearings are overheated, whether the fastening screws and key pins of each part are loose, if it is loose, it should be tightened at any time. After each operation, the fruit machine The bottom of the sieve, that is, the hole in the slats, is regularly cleaned with a wire brush. After the processing season is over, the machine is inspected once. Check the running and wear of each bearing; check for deformation or cracks in the bottom of the screen. After the inspection, repair the damaged parts to remove dirt and residual peanuts from the machine. After the peanut peeler is used, the belt is removed and the machine is placed in a dry warehouse for storage. The removed belt should be hung on an indoor wall that is not exposed to the sun.